Bona Traffic HD SilkMatt Varnish 5L

4.9 out of 5 - overall rating based on 4 reviews by registered buyers
£134.73, Inc. VAT £112.28, Ex. VAT

Bona Traffic HD is made for hardwood floor owners with an uncompromising attitude towards durability, being green and looking beautiful. It is the world's toughest and fastest drying lacquer for woode...

Bottle(s):


SKU
WT155346001
Category
Tags
Floor Finishing Products, Floor Lacquers

  • Product Description

    Bona Traffic HD is made for hardwood floor owners with an uncompromising attitude towards durability, being green and looking beautiful. It is the world's toughest and fastest drying lacquer for wooden floors exposed to extreme wear, allowing full traffic to be resumed in 12 hours.  Significantly outperforms all other polyurethane topcoat finishes, including Bona Traffic, in durability at 24 hours.

    Bona Traffic HD is a two-component, polyurethane, waterborne varnish for the surface treatment of timber floors in commercial premises, or wherever a high resistance to wear is required. This product is also suitable for overcoating of compatible factory pre-finished timber and cork floors.

    Recommended To Use In

    Commercial and residential buildings including shopping malls, restaurants, offices, retail stores, theatre stages, hospitals, schools, and nursing homes.

    Bona Traffic HD provides a clear, natural appearance, giving almost invisible protection when the IP (Matt) version is used. However, unlike oil, it offers a simple level of maintenance. It is Bona's most hard-wearing lacquer. Available in IP (Matt) or Silkmatt versions. Where there is a risk of side bonding, Bona Prime Classic is recommended for the initial coat on bare wood. 

    Advantages

    • Significantly outperforms all urethane finishes, including Bona Traffic®, in durability at 24 hours
    • Unsurpassed scuff, scratch and chemical resistance at full cure
    • Very low VOCs - less than 125
    • Very low odour
    • Clear and colourless, which highlights the true colour of stained or natural wood floors. Will not change colour over time, allowing for easy touch-up GREENGUARD Children & Schools, SM Certified
    • No sealer is needed over a stained floor
    • Exceptional build with excellent flow and levelling
    • Available in Commercial Satin, Commercial Semi-Gloss, and Commercial Extra Matt
    • Fast drying – approximately 2-3 hours
    • Non-flammable with a non-offending odour
    • Water clean-up

    Preparations

    Prior to application, you must pre-treat the surface with a waterborne primer from Bona. Make sure that the floor is acclimatized to its end-use environment, and is free from any debris left from the sanding - this includes sanding dust, oil, wax, as well as other contamination. Allow the lacquer and the hardener to reach room temperature. Optimal application conditions are between 18-25°C and 30-60% relative room air humidity. High temperatures and low humidity shorten, low temperatures and high humidity lengthen drying time, with the minimum temperature for use is 13°C

    For previously lacquered floors

    This product has very good adhesion to factory pre-finished and previously lacquered floors, but the surface must be carefully cleaned and abraded prior to overcoating. 

    Recommended Treatment Schedules

    On bare wood - 1 x Primer plus 2-3 Traffic or 3-4 Traffic

    Overcoating - 1-2 Traffic

    Keep in mind it's not recommended to apply more than two full coats per day, due to the risk of excessive wood swelling. Poor drying conditions may result in a weakened film with worsened adhesion, so you must ensure there's an unobstructed airflow during drying.

    Application

    Shake the Traffic HD can and add one bottle of Traffic HD Hardener. Immediately proceed with shaking the mixture for at least a minute, then insert the enclosed filter. In case you are mixing smaller quantities of lacquer, then pour the required amount of lacquer into a separate can. 1 litre of lacquer corresponds to one part of hardener, 2 litres to 2 parts and so on. The resulting mixture has to be used within 4 hours.

    Apply the lacquer using a Bona Roller. Roll with a smooth, flowing motion alternately across and with the grain of the wood, avoiding accumulations of the product. Always maintain a 'wet edge' to avoid overlaps. Before applying the following layers, you should let it dry properly.

    If necessary, you can do an intermediate sanding using a screen, or the Bona Scrad System grit P150(or even finer one than that), then remove the dust before applying a final layer of lacquer. It has to be noted that if the previous layer of lacquer has been allowed more than 24 hours of drying time, then an intermediate sanding is always required. After the aforementioned treatment, floors will be able to take light floor traffic for approximately 8 hours and can be put into full use after 12 hours. Allow the surface to dry for at least 3 days before covering with carpets or other floor coverings.

    After the aforementioned treatment, floors will be able to take light floor traffic for approximately 8 hours and can be put into full use after 12 hours. Allow the surface to dry for at least 3 days before covering it with carpets or other floor coverings. Also, avoid placing heavy objects and avoid damp mopping the floor during this time. Another important note: if Traffic HD has been combined with Bona Prime Deep and Bona Create, then the surface must be allowed to cure for 1 week before covering the surface.

    NOTE: Traffic must be used with the Hardener. The Traffic/Hardener must be mixed by shaking it vigorously for one minute. If small quantities of product are to be mixed, the Traffic container must be shaken before decanting the product from it. Once mixed, Traffic is viable for five hours.

    We offer Bona Traffic HD in Silk, Matt, ExtraMatt and Anti Slip Matt.

    product barcode 7312799215538

  • Specification

    Sealant & Lacquer Specification
    Coverage 10m²/L
    Component Base Two Component
    Drying Time 2 hours
    Pack Size 5L
    Colour Clear
    Type of Finish Satin
    Drying Component Water-Based
  • Rosie

    09 Jun, 2016

    A friend with more experience recommended it to us and we did not regret it. It doesn't smell much, and the men we hired to do the job said it was easy to apply. I am not a professional but looking at my floor now I tend to agree with them. Still looks great and proved to be resistant to heavy use.

    Design:
    Ease of Use:
    Maintenance:
    Price:
    Timelasting:

    James

    24 May, 2016

    One of the best lacquers I have used - from application and durability view. A bit pricey - the only downside for me.

    Design:
    Ease of Use:
    Maintenance:
    Price:
    Timelasting:

    Dylan

    05 Feb, 2016

    Can be applied multiple times for one day as it dries fast and has almost no odour. People are always happy when I use it on their floors as a finish. Good quality comes with a price tag.

    Design:
    Ease of Use:
    Maintenance:
    Price:
    Timelasting:

    Alen

    01 Jun, 2015

    Top floor lacquer! never failed me

    Design:
    Ease of Use:
    Maintenance:
    Price:
    Timelasting:

Similar Products